If you’re like most people, you probably take a shower every day. And if you’re like most people, you probably have a shower door. Over time, the shower cleaning sliding door tracks can become dirty and stained. In this article, we will teach you how to clean your shower door track.
Vinegar and Baking Soda
Cleaning shower door tracks can be a bit tricky, but it’s definitely worth it to get that gunk and grime out of that shower door rail. Vinegar is a great natural cleaner that can do the trick.
Here’s what you’ll need:
- vinegar;
- baking soda;
- toilet brush;
- sponge;
- bucket;
Here’s what you’ll do:
- Pour vinegar into a bucket.
- Add baking soda to the bucket.
- Stir the ingredients together to create a cleaning solution.
- Using a toilet brush, scrub the door tracks to loosen any dirt or grime.
- Rinse the tracks with water.
- Wipe the tracks dry with a sponge.
Lemon Juice And Salt
There are a few different ways to clean your shower door tracks, but one of the easiest and most effective ways is to use lemon juice and salt.
To clean your shower door tracks with lemon juice and salt, you will need:
- 1 lemon
- 1 tablespoon salt
Instructions:
- Cut the lemon in half and squeeze the juice into a bowl.
- Add the salt and mix it together.
- Using a toothbrush, scrub the mixture into the tracks of your shower door.
- Let the mixture sit for 5-10 minutes.
- Rinse the tracks with warm water and dry.
This is a simple and easy way to clean your shower door tracks and get rid of any built-up dirt, grease, or soap scum.
Baking Soda
If not kept clean, dirt and soap scum can build up, making the door difficult to open and close. The good news is that baking soda is a great cleaner and can easily take care of the build-up.
To clean the shower door tracks, start by mixing together baking soda and water to form a paste. Apply the paste to a scrub brush and scrub the tracks to remove any dirt or build-up. Rinse the tracks with water to remove the baking soda paste.
If the tracks are really dirty, you may need to repeat the process a few times. Be sure to rinse the tracks thoroughly after each time to avoid any residue.
Cleaning shower tracks is a quick and easy way to keep your shower looking clean and tidy. Baking soda is a great cleaner and is safe for use on plastic and metal tracks. Give it a try today!
Hydrogen Peroxide
Hydrogen peroxide is a great cleaner because it is effective at removing dirt and grime, and it is also safe to use around your family and pets.
- To clean your shower door tracks with hydrogen peroxide, start by mixing equal parts hydrogen peroxide and water in a spray bottle.
- Then, spray the mixture onto the dirt tracks and let it sit for a few minutes.
- Next, use a brush or a toothbrush to scrub the dirt and grime away.
- Finally, rinse the tracks clean with water.
If you find that the dirt and grime are stubborn, you can try using a little bit of dish soap or vinegar to help break it up.
Hydrogen peroxide is a safe and effective way to clean your shower door tracks, and it will help keep them looking clean and new.
Commercial Cleaners
- The first step is to gather your supplies. You will need a commercial shower door track cleaner, a bucket, water, and a scrub brush.
- The next step is to mix the cleaner according to the instructions on the bottle.
- Once the cleaner is mixed, it is time to start cleaning! Dip the scrub brush into the cleaner and start scrubbing the dirt and gunk out of the tracks.
- Be sure to pay special attention to the corners and edges of the tracks.
- Once the tracks are clean, rinse them with water to remove all of the cleaners.
- Finally, dry the tracks with a clean towel.
And that’s it! Your shower door tracks are now clean and free of gunk.
Steamer
Keeping your shower clean is a never-ending battle. But with a few simple steps and the right tools, you can make it a little easier.
One of the most challenging parts of cleaning a shower is getting to the tracks of the shower door. Luckily, there’s a simple solution that doesn’t require any harsh chemicals.
All you need is a steam cleaner.
Steam cleaners are a great way to clean all kinds of surfaces, including grime and dirt that can build up in shower door tracks.
The best part is that they’re easy to use. Just fill the tank with water, plug it in, and wait for the steam to start flowing.
Then, use the steam cleaner to blast the dirt and grime out of the tracks. Be sure to pay special attention to the corners and edges, where dirt and gunk can build up.
If the tracks are really dirty, you may have to scrub them a little bit. But be careful not to damage the seal around the door.
Once the tracks are clean, give the entire shower a good scrubbing. And be sure to rinse the floor well so there’s no residue from the cleaner.
Now your shower is clean and ready for another month of use.
Mold Remover
- Start by spraying the mold remover onto the tracks. Be sure to get the entire area, including the crevices.
- Let the remover sit for a few minutes so that it can break down the mold and gunk.
- Then, use a cloth or sponge to wipe the tracks clean.
- Finally, rinse the area with water to remove any remaining mold remover.
If you have a particularly stubborn build-up of mold under the shower door track, you may need to repeat these steps a few times. Sometimes you should consider removing shower door tracks for a time being. But overall, this is a quick and easy way to clean your shower door tracks.
Advice on keeping the shower doors clean
Shower door tracks can get dirty and grimy over time, making it difficult to keep the shower doors clean. However, using a few simple tips, you can keep your shower door tracks clean and free of debris.
One way to keep your shower door tracks clean is to regularly wipe them down with a wet rag. This will remove any built-up dirt or debris and will help keep your shower looking clean.
Another way to keep your shower door tracks clean is to use a vacuum cleaner. By vacuuming the tracks regularly, you can remove any built-up dirt or dust.
Finally, to keep your shower door tracks free of mold and mildew, you can use a bleach solution. Simply mix bleach and water in a spray bottle, and then spray the solution on the tracks. Let the solution sit for a few minutes, and then rinse with water.
FAQ
How to clean shower door tracks?
To clean shower door tracks, start by spraying them down with a cleaning solution. Next, use a brush or a cloth to scrub the tracks clean. Finally, rinse the tracks with water.
Can I use a vacuum cleaner to clean my shower door tracks?
Yes, you can use a vacuum cleaner to clean your shower door tracks. However, you will need to use a brush to scrub the tracks clean before vacuuming them.
Can I use a toothbrush to clean my shower door tracks?
Yes, you can use a toothbrush to clean your shower door tracks. However, you will need to use a cleaning solution to help loosen the dirt and grime.
What can I use to clean my shower door tracks?
You can use a variety of things to clean your shower door tracks, including a cleaning solution, a brush, and a cloth.
Conclusion
Hopefully, with these tips, your shower door tracks will stay clean and free of grime. Once you get the hang of cleaning them, you can keep your shower looking clean and new.
Gerald Carpenter
My name is Gerald Carpenter and I am a professional plumber in the third generation. My father was a plumber, my grandfather was a plumber. I wish I had records on my other ancestors.
