How to Clean a Toilet Brush? – Step-By-Step DIY Guide

Bathrooms are teeming with germs, and the toilet is one of the germiest places in the bathroom. Toilet brushes are designed to clean the toilet bowl, including under the rim, where bacteria can hide.

But unless the brush is cleaned regularly, it can become a breeding ground for bacteria.

Cleaning Toilet Brush

Everyone knows how important it is to keep our toilets clean. But what about the toilet brush? This essential tool can get pretty dirty itself, and if it’s not properly cleaned, it can actually spread germs around your bathroom.

So how do you clean a toilet brush? Here’s a step-by-step guide:

  1. Rinse the brush head under hot water. This will help remove any residual dirt or cleaner from the brush.
  2. Fill a bucket or sink with hot water and a disinfectant. You can use a domestic cleaner or a watered-down bleach solution.
  3. Submerge the brush head in the hot water and let it soak for a few minutes.
  4. Use a toilet brush scrubber to scrub the bristles, getting rid of any stubborn dirt.
  5. Rinse the brush head under hot water again.
  6. Allow the brush head to air dry.

Store a brush in a dry, clean place.

Changing a brush to clean the toilet is easy. When the bristles start to wear out or the brush itself becomes grungy, simply buy a new one. But cleaning a toilet brush is a bit more of a challenge.

In this guide, you’ll learn how to clean a toilet brush.

How Often to Clean a Toilet Brush and Plunger Set

Cleaning a toilet brush

A toilet brush and plunger set should be cleaned at least monthly, preferably with a bleach-based cleaner. More frequent cleaning may be necessary if the brush and plunger are used frequently or if they are exposed to soap or other cleaning products.

When to Replace a Sanitizing Toilet Brush?

Sanitizing toilet brushes are an important part of keeping your bathroom clean. These brushes are designed to clean and disinfect the bowl of your toilet, getting rid of any bacteria or germs that may be present.

It’s important to replace your sanitizing toilet brush regularly, as the bristles can become worn down and ineffective over time. Most brushes should be replaced every six to eight months, but if you use your brush frequently, you may need to replace it more often.

If the bristles on your brush become discolored, flattened, or brittle, it’s time to replace the brush. Additionally, if the head of the brush becomes loose or damaged, you’ll need to get a new one.

With proper care, your cleaning toilet brush will last at least one year.

The Tools and Materials You Need to Clean a Toilet Cleaning Brush

You will need a toilet cleaning brush, a plastic bucket, rubber gloves, eye protection, and a microfiber cloth.

You will also need chlorine bleach, a disinfectant spray, hydrogen peroxide, and a disinfectant wipe.

How to Clean a Toilet Brush

Cleaning a toilet brush doesn’t have to be a gross or difficult task. With just a few simple steps, you can have your toilet brush clean and ready to use again in no time.

Disinfecting in a bleach solution

When disinfecting with a bleach solution, it is important to take precautions to avoid splashing and protect your skin and eyes. Wear gloves and safety glasses and pour hot water into a bucket large enough to hold the toilet brush you are disinfecting.

Add the bleach, then slowly add the toilet brush you are disinfecting, being careful to avoid splashing.

Let it soak for at least one hour, then remove the brush and rinse under hot water for at least 30 seconds.

Dry with a microfiber cloth or allow to air dry completely before storing.

Cleaning with an all-purpose cleaner

If you’re looking for an easy way to clean your toilet brush, reach for an all-purpose cleaner.

Fill a bucket or large sink with boiling water and add the amount of cleaner recommended on the product label.

Submerge the toilet brush and holder in the water and let them soak for at least two hours.

Wearing rubber gloves, remove the brush and holder and rinse each one under running hot water for at least 30 seconds.

Dry the brush and holder with a microfiber cloth, then allow the brush to air-dry completely before storing it in the holder.

A quick cleaning with disinfectant spray

If you need to quickly clean your toilet brush, you can do so by using a disinfectant spray and a disinfectant wipe.

First, clean the toilet brush with the disinfectant spray and then rinse it in the toilet.

Next, hold the brush head over the toilet bowl and generously spray it with a disinfectant spray.

Finally, use a disinfectant wipe to clean the handle and the holder.

How to Help Your Toilet Brush and Holder Last Longer

If you want your toilet brush and holder to last longer, there are a few things you can do:

  • store the brush and holder in a cool, dry place;
  • make sure the brush is always clean before you put it away;
  • inspect the brush regularly for wear and tear, and replace it if necessary;
  • avoid using harsh chemicals or abrasives on the brush or holder.

FAQ

brush for cleaning a toilet

What is an alternative to the toilet brush?

There are a few alternatives to the toilet brush, such as the toilet wand, toilet sponge, or toilet brush and plunger combo. The toilet wand is a handheld device that uses disposable cleaning pads. The toilet sponge is a soft, reusable sponge that can be used to clean the bowl.

The toilet brush and plunger combo is a two-in-one tool that can be used to clean the bowl and plunge the toilet.

What’s the fastest way to clean a sanitizing toilet brush?

The fastest way to clean a toilet brush is to rinse it thoroughly with water after each use. You can also soak the brush in a mixture of vinegar and water for about 30 minutes to disinfect it.

Why do hotels not have toilet brushes?

The reason is that toilet brushes can be difficult to keep clean and sanitary. If a toilet brush is not cleaned properly, it can spread germs and bacteria.

Why are public toilets gross?

Public toilets are gross because people use them to relieve themselves and then don’t properly clean up afterward.

Bottom Line

The toilet brush is one of the most important tools in the bathroom, but it is often overlooked when it comes to cleaning. A toilet brush is used to scrub the bowl clean and remove any buildup of dirt, grime, and bacteria.

However, the toilet brushes themselves can become dirty and full of germs over time. If it is not cleaned properly, it can actually spread bacteria around the bathroom instead of cleaning it.

The best way to clean a toilet brush is to rinse it with hot water after each use. Then, once a week, disinfect the brush by soaking it in a mixture of 1 part bleach to 10 parts water for at least 30 minutes. Rinse the brush well and let it air-dry before using it again.

How do you clean your toilet brushes? Share your answers in the comments.

Gerald Carpenter

My name is Gerald Carpenter and I am a professional plumber in the third generation. My father was a plumber, my grandfather was a plumber. I wish I had records on my other ancestors.

We will be happy to hear your thoughts

Leave a reply

Solve : *
11 − 1 =


Sanitary Review
Logo